Editing IA machine install

== Pre-requisites ==
* Open machine cover
* Type of LBPayLinker devices (Model NYJ or A1)
* Type of LBPayLinker wiring cable (BC, IA or TOSEI)

== IA Machine ==
[[File:Ia machine.jpg|center|thumb]]



== Getting Started ==

# Make sure the LBPayLinker model Type. See picture.

{| class="wikitable"
|+
![[File:1000030570.png|center|thumb]]NYJ31
![[File:1000030589.png|center|thumb]]A1
|}

2. Check LBPayLinker parts.

* For model NYJ31 - antenna and machine wiring cable
* For model A1 - interface cable and machine wiring cable

{| class="wikitable"
|+
![[File:Ia device parts.jpg|center|thumb]]NYJ31
![[File:A1 ia device parts.jpg|center|thumb]]A1
|}


3. Connect the interface cable on the device.
{| class="wikitable"
|+
![[File:Ia device connection.jpg|center|thumb]]NYJ31
![[File:A1 ia connection.jpg|center|thumb|486x486px]]A1
|}


4. Open IA machine cover.
[[File:Ia machine open cover.jpg|center|thumb|459x459px]]

5. Locate power connector and disconnect it to shutdown the machine.



6. Locate coindrop interface cable to machine board.

(1) Coindrop power to board
[[File:Ia coindrop cable.jpg|center|thumb|450x450px]]

(2) Coindrop signal to board
[[File:Ia signal cable.jpg|center|thumb|450x450px]]

7. Locate LBPayLinker machine wiring cable.
[[File:Ia interface cable.jpg|center|thumb|447x447px]]



8. Connect machine wiring cable IA type to coindrop - board cable.

(1) Disconnect coindrop cable and connect LBPayLinker wiring cable to the coindrop.
[[File:Connect lbpaylinker cable to coindrop.png|center|thumb]]


(2) Disconnect board cable and connect LBPayLinker signal wiring cable to the board.  
[[File:Connect lbpaylinker cable to board.png|center|thumb]]  

9. Connect machine power source connector to the board.

10. After installation, IA LCD screen will display error "Out of order".
[[File:Ia machine error resize.jpg|center|thumb]]


This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app. [[Configure device using admin app]]

== Installation Video ==
Click link below to view installation video.


https://lbunlimitedwash.com/lbwiki/video/IA_Device_installation.mp4