Editing TOSEI machine install


== Pre-requisites ==

* Open machine cover
* Type of LBPayLinker devices (Model NYJ or A1)
* Type of LBPayLinker wiring cable (BC, IA or TOSEI)

== TOSEI Machine ==
[[File:Tosei mesin.jpg|center|thumb]]

== Getting Started ==

# Make sure the LBPayLinker model Type. See picture.

{| class="wikitable"
|+
![[File:1000030570.png|center|thumb]]NYJ31
![[File:1000030589.png|center|thumb]]A1
|}

2. Check LBPayLinker parts.

* For model NYJ31 - antenna and machine wiring cable
* For model A1 - interface cable and machine wiring cable

{| class="wikitable"
|+
![[File:Tosei bc part.jpg|center|thumb]]NYJ31
![[File:A1 tosei part.jpg|center|thumb|417x417px]]A1
|}

3. Connect the interface cable on the device.
{| class="wikitable"
|+
![[File:Tosei bc connection.jpg|center|thumb]]NYJ31
![[File:A1 bc connection.jpg|center|thumb|400x400px]]A1
|}

4. Open Tosei machine cover.
[[File:Tosei open top cover.jpg|center|thumb]]

5. Switch off the machine.

6. Unscrew board cover to access the mainboard.
[[File:Tosei cover board remove.jpg|center|thumb|452x452px]]
7. Locate coindrop interface cable to machine board.
[[File:Locate tosei board cable.jpg|center|thumb|537x537px]]



8. Locate LBPayLinker machine wiring cable.

(1) Connect to the TOSEI board

(2) Connect to the TOSEI interface cable[[File:Tosei interface cable resize.jpg|center|thumb|435x435px]]



9. Connect machine wiring cable Tosei type to coindrop - board cable.

(1) Disconnect TOSEI interface cable from the board and connect it to the LBPayLinker wiring connector slot.

(2) Connect LBPayLinker wiring connector to the TOSEI board.
[[File:Install tosei interface cable.jpg|center|thumb|383x383px]]
[[File:Connect tosei cable to board.jpg|center|thumb|531x531px]]

10. Connect machine power source connector to the board.

11. After installation, TOSEI screen will display error "Please use another machine".
[[File:Screen tosei after install device.jpg|center|thumb|415x415px]]
This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app. [[Configure device using admin app]]

== Installation video ==
Click link below to view installation video.

[https://lbunlimitedwash.com/lbwiki/video/TOSEI_Install.mp4 https://lbunlimitedwash.com/lbwiki/video/TOSEI_install.mp4]