TOSEI machine install: Difference between revisions
No edit summary |
No edit summary |
||
| (6 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
== TOSEI Machine == | == TOSEI Machine == | ||
[[File:Tosei mesin.jpg|center|thumb]] | |||
== Getting Started == | == Getting Started == | ||
| Line 36: | Line 37: | ||
|} | |} | ||
4. Open Tosei machine cover. | |||
[[File:Tosei open top cover.jpg|center|thumb]] | |||
5. Switch off the machine. | |||
6. Unscrew board cover to access the mainboard. | |||
[[File:Tosei cover board remove.jpg|center|thumb|452x452px]] | |||
7. Locate coindrop interface cable to machine board. | |||
[[File:Locate tosei board cable.jpg|center|thumb|537x537px]] | |||
8. Locate LBPayLinker machine wiring cable. | |||
(1) Connect to the TOSEI board | |||
(2) Connect to the TOSEI interface cable[[File:Tosei interface cable resize.jpg|center|thumb|435x435px]] | |||
[[File:Tosei interface cable resize.jpg|center|thumb|435x435px]] | |||
9. Connect machine wiring cable Tosei type to coindrop - board cable. | |||
(1) Disconnect | (1) Disconnect TOSEI interface cable from the board and connect it to the LBPayLinker wiring connector slot. | ||
(2) | (2) Connect LBPayLinker wiring connector to the TOSEI board. | ||
[[File:Install tosei interface cable.jpg|center|thumb|383x383px]] | |||
[[File:Connect tosei cable to board.jpg|center|thumb|531x531px]] | |||
10. Connect machine power source connector to the board. | |||
11. After installation, TOSEI screen will display error "Please use another machine". | |||
[[File:Screen tosei after install device.jpg|center|thumb|415x415px]] | [[File:Screen tosei after install device.jpg|center|thumb|415x415px]] | ||
This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app. | This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app. [[Configure device using admin app]] | ||
== Installation video == | |||
Click link below to view installation video. | |||
[https://lbunlimitedwash.com/lbwiki/video/TOSEI_Install.mp4 https://lbunlimitedwash.com/lbwiki/video/TOSEI_install.mp4] | |||
Latest revision as of 02:48, 27 April 2026
Pre-requisites
[edit | edit source]- Open machine cover
- Type of LBPayLinker devices (Model NYJ or A1)
- Type of LBPayLinker wiring cable (BC, IA or TOSEI)
TOSEI Machine
[edit | edit source]
Getting Started
[edit | edit source]- Make sure the LBPayLinker model Type. See picture.
 |
 |
|---|
2. Check LBPayLinker parts.
- For model NYJ31 - antenna and machine wiring cable
- For model A1 - interface cable and machine wiring cable
 |
 |
|---|
3. Connect the interface cable on the device.
 |
 |
|---|
4. Open Tosei machine cover.
5. Switch off the machine.
6. Unscrew board cover to access the mainboard.
7. Locate coindrop interface cable to machine board.
8. Locate LBPayLinker machine wiring cable.
(1) Connect to the TOSEI board
(2) Connect to the TOSEI interface cable
9. Connect machine wiring cable Tosei type to coindrop - board cable.
(1) Disconnect TOSEI interface cable from the board and connect it to the LBPayLinker wiring connector slot.
(2) Connect LBPayLinker wiring connector to the TOSEI board.
10. Connect machine power source connector to the board.
11. After installation, TOSEI screen will display error "Please use another machine".
This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app. Configure device using admin app
Installation video
[edit | edit source]Click link below to view installation video.