Jump to content

TOSEI machine install: Difference between revisions

From LB Knowledge Base
← Older editNewer edit →
undoAdmin (talk | contribs)
Bureaucrats, Interface administrators, Administrators
156 edits
VisualWikitext
No edit summary
No edit summary
Line 43: Line 43:


6. Locate coindrop interface cable to machine board.
6. Locate coindrop interface cable to machine board.
[[File:Locate tosei board cable.jpg|center|thumb|537x537px]]






7. Locate LBPayLinker machine wiring cable.[[File:Tosei interface cable resize.jpg|center|thumb|435x435px]]
7. Locate LBPayLinker machine wiring cable.
 
(1) Connect to the TOSEI board
 
(2) Connect to the TOSEI interface cable[[File:Tosei interface cable resize.jpg|center|thumb|435x435px]]




Line 52: Line 57:
8. Connect machine wiring cable Tosei type to coindrop - board cable.
8. Connect machine wiring cable Tosei type to coindrop - board cable.


(1) Disconnect coindrop power to board cable and connect with LBPayLinker coindrop wiring cable.
(1) Disconnect TOSEI interface cable from the board and connect it to the LBPayLinker wiring connector slot.


(2) Disconnect coindrop signal to board cable and connect with LBPayLinker signal wiring cable.
(2) Connect LBPayLinker wiring connector to the TOSEI board.
[[File:Install tosei interface cable.jpg|center|thumb|383x383px]]


9. Connect machine power source connector to the board.
9. Connect machine power source connector to the board.

Revision as of 21:15, 22 April 2026

Pre-requisites

  • Open machine cover
  • Type of LBPayLinker devices (Model NYJ or A1)
  • Type of LBPayLinker wiring cable (BC, IA or TOSEI)

TOSEI Machine

Getting Started

  1. Make sure the LBPayLinker model Type. See picture.
NYJ31
A1

2. Check LBPayLinker parts.

  • For model NYJ31 - antenna and machine wiring cable
  • For model A1 - interface cable and machine wiring cable
NYJ31
A1

3. Connect the interface cable on the device.

NYJ31
A1

4. Open Tosei machine cover.

5. Locate power connector and disconnect it to shutdown the machine.

6. Locate coindrop interface cable to machine board.


7. Locate LBPayLinker machine wiring cable.

(1) Connect to the TOSEI board

(2) Connect to the TOSEI interface cable


8. Connect machine wiring cable Tosei type to coindrop - board cable.

(1) Disconnect TOSEI interface cable from the board and connect it to the LBPayLinker wiring connector slot.

(2) Connect LBPayLinker wiring connector to the TOSEI board.

9. Connect machine power source connector to the board.

10. After installation, TOSEI screen will display error "Please use another machine".

This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app.

Installation video

Click link below to view installation video.

https://lbunlimitedwash.com/lbwiki/video/TOSEI_install.mp4

Retrieved from "https://lbunlimitedwash.com/lbwiki/index.php?title=TOSEI_machine_install&oldid=132"