TOSEI machine install: Difference between revisions
add tosei install content |
No edit summary |
||
| Line 6: | Line 6: | ||
* Type of LBPayLinker wiring cable (BC, IA or TOSEI) | * Type of LBPayLinker wiring cable (BC, IA or TOSEI) | ||
== | == TOSEI Machine == | ||
== Getting Started == | == Getting Started == | ||
| Line 17: | Line 17: | ||
![[File:1000030589.png|center|thumb]]A1 | ![[File:1000030589.png|center|thumb]]A1 | ||
|} | |} | ||
2. Check LBPayLinker parts. | 2. Check LBPayLinker parts. | ||
| Line 29: | Line 28: | ||
![[File:A1 tosei part.jpg|center|thumb|417x417px]]A1 | ![[File:A1 tosei part.jpg|center|thumb|417x417px]]A1 | ||
|} | |} | ||
3. Connect the interface cable on the device. | 3. Connect the interface cable on the device. | ||
| Line 37: | Line 35: | ||
![[File:A1 bc connection.jpg|center|thumb|400x400px]]A1 | ![[File:A1 bc connection.jpg|center|thumb|400x400px]]A1 | ||
|} | |} | ||
4. Open Tosei machine cover. | 4. Open Tosei machine cover. | ||
| Line 47: | Line 47: | ||
(2) Coindrop signal to board | (2) Coindrop signal to board | ||
7. Locate LBPayLinker machine wiring cable. | 7. Locate LBPayLinker machine wiring cable. | ||
| Line 60: | Line 61: | ||
9. Connect machine power source connector to the board. | 9. Connect machine power source connector to the board. | ||
10. After installation, TOSEI screen will display error "Please use another machine". | |||
[[File:Screen tosei after install device.jpg|center|thumb|415x415px]] | |||
This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app. | |||
Revision as of 21:12, 21 April 2026
Pre-requisites
- Open machine cover
- Type of LBPayLinker devices (Model NYJ or A1)
- Type of LBPayLinker wiring cable (BC, IA or TOSEI)
TOSEI Machine
Getting Started
- Make sure the LBPayLinker model Type. See picture.
 |
 |
|---|
2. Check LBPayLinker parts.
- For model NYJ31 - antenna and machine wiring cable
- For model A1 - interface cable and machine wiring cable
 |
 |
|---|
3. Connect the interface cable on the device.
 |
 |
|---|
4. Open Tosei machine cover.
5. Locate power connector and disconnect it to shutdown the machine. 6. Locate coindrop interface cable to machine board.
6. Locate coindrop interface cable to machine board.
(1) Coindrop power to board
(2) Coindrop signal to board
7. Locate LBPayLinker machine wiring cable.
8. Connect machine wiring cable Tosei type to coindrop - board cable.
(1) Disconnect coindrop power to board cable and connect with LBPayLinker coindrop wiring cable.
(2) Disconnect coindrop signal to board cable and connect with LBPayLinker signal wiring cable.
9. Connect machine power source connector to the board.
10. After installation, TOSEI screen will display error "Please use another machine".
This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app.