TOSEI machine install: Difference between revisions
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
== TOSEI Machine == | == TOSEI Machine == | ||
[[File:Tosei mesin.jpg|center|thumb]] | |||
== Getting Started == | == Getting Started == | ||
| Line 35: | Line 36: | ||
![[File:A1 bc connection.jpg|center|thumb|400x400px]]A1 | ![[File:A1 bc connection.jpg|center|thumb|400x400px]]A1 | ||
|} | |} | ||
4. Open Tosei machine cover. | 4. Open Tosei machine cover. | ||
[[File:Tosei open top cover.jpg|center|thumb]] | |||
5. Locate power connector and disconnect it to shutdown the machine. | 5. Locate power connector and disconnect it to shutdown the machine. | ||
6. Locate coindrop interface cable to machine board. | 6. Locate coindrop interface cable to machine board. | ||
7. Locate LBPayLinker machine wiring cable. | 7. Locate LBPayLinker machine wiring cable.[[File:Tosei interface cable resize.jpg|center|thumb|435x435px]] | ||
[[File:Tosei interface cable resize.jpg|center|thumb|435x435px]] | |||
Revision as of 04:08, 22 April 2026
Pre-requisites
- Open machine cover
- Type of LBPayLinker devices (Model NYJ or A1)
- Type of LBPayLinker wiring cable (BC, IA or TOSEI)
TOSEI Machine
Getting Started
- Make sure the LBPayLinker model Type. See picture.
 |
 |
|---|
2. Check LBPayLinker parts.
- For model NYJ31 - antenna and machine wiring cable
- For model A1 - interface cable and machine wiring cable
 |
 |
|---|
3. Connect the interface cable on the device.
 |
 |
|---|
4. Open Tosei machine cover.
5. Locate power connector and disconnect it to shutdown the machine.
6. Locate coindrop interface cable to machine board.
7. Locate LBPayLinker machine wiring cable.
8. Connect machine wiring cable Tosei type to coindrop - board cable.
(1) Disconnect coindrop power to board cable and connect with LBPayLinker coindrop wiring cable.
(2) Disconnect coindrop signal to board cable and connect with LBPayLinker signal wiring cable.
9. Connect machine power source connector to the board.
10. After installation, TOSEI screen will display error "Please use another machine".
This indicate the device need to change the setting parameter for the machine. Next step is to configure the LBPayLinker device app through admin app.