IA machine install: Difference between revisions
add ia install content |
add ia install content |
||
| Line 5: | Line 5: | ||
* Type of LBPayLinker wiring cable (BC, IA or TOSEI) | * Type of LBPayLinker wiring cable (BC, IA or TOSEI) | ||
== IA Machine == | |||
IA Machine | [[File:Ia machine.jpg|center|thumb]] | ||
| Line 42: | Line 42: | ||
4. Open IA machine cover. | 4. Open IA machine cover. | ||
[[File:Ia machine open cover.jpg|center|thumb|459x459px]] | |||
| | |||
5. Locate power connector and disconnect it to shutdown the machine. | 5. Locate power connector and disconnect it to shutdown the machine. | ||
6. Locate coindrop interface cable to machine board. | 6. Locate coindrop interface cable to machine board. | ||
Revision as of 23:11, 18 April 2026
Pre-requisites
- Open machine cover
- Type of LBPayLinker devices (Model NYJ or A1)
- Type of LBPayLinker wiring cable (BC, IA or TOSEI)
IA Machine
Getting Started
- Make sure the LBPayLinker model Type. See picture.
 |
 |
|---|
2. Check LBPayLinker parts.
- For model NYJ31 - antenna and machine wiring cable
- For model A1 - interface cable and machine wiring cable
 |
 |
|---|
3. Connect the interface cable on the device.
 |
 |
|---|
4. Open IA machine cover.
5. Locate power connector and disconnect it to shutdown the machine.
6. Locate coindrop interface cable to machine board.
(1) Coindrop power to board
(2) Coindrop signal to board
7. Locate LBPayLinker machine wiring cable.
8. Connect machine wiring cable BC type to coindrop - board cable.
(1) Disconnect coindrop power to board cable and connect with LBPayLinker coindrop wiring cable.
(2) Disconnect coindrop signal to board cable and connect with LBPayLinker signal wiring cable.
9. Connect machine power source connector to the board.