Jump to content

Configure device using admin app

From LB Knowledge Base
Revision as of 03:20, 21 April 2026 by Admin (talk | contribs)

Pre-requisite

To use the admin app, first enable wifi and bluetooth on the mobile phone.


Connect wifi to paynwash SSID. Get the SSID credential from IT Admin to connect to the paynwash SSID. Please make sure don't share the credential with anyone or public. This SSID is just to connect LBPayLinker, vending machine, massage chair and CCTV only and limited to 50 concurrent user only.

Configure LBPayLinker Device

After install LBPayLinker device in the machine, the LBPayLinker device need to configure:-

  • Internet access
  • Bind machine type
  • Config Parameter (For IA and TOSEI. BC already use default parameter set in the device).

Getting Started - Configure Internet Access

In the admin app, click menu Device Install and then click Config Network.

Scan the device QR. Depend on the device model.

  • For the NYJ31 device, QR Code is on the front on the device.
  • For the A1 model, QR Code is on the screen after installation or at the back of the device.
at the front
at the back


After scan the device QR, app will display list of wifi SSID. Please select paynwash. Make sure it is paynwash not paynwash_5g.

SSID paynwash is 2.4Ghz signal. The device only connect to the wifi 2.4Ghz only.

select paynwash SSID
enter paynwash password.

Wait for the app to connect to the internet. Config network succes indicate the device already connected to the internet.

Retrieved from "https://lbunlimitedwash.com/lbwiki/index.php?title=Configure_device_using_admin_app&oldid=108"