Jump to content

BC machine (washer and dryer) install: Difference between revisions

From LB Knowledge Base
← Older edit
Admin (talk | contribs)
Bureaucrats, Interface administrators, Administrators
156 edits
VisualWikitext
Add bc content
No edit summary
 
(22 intermediate revisions by 2 users not shown)
Line 4: Line 4:
* Type of LBPayLinker devices (Model NYJ or A1)
* Type of LBPayLinker devices (Model NYJ or A1)
* Type of LBPayLinker wiring cable (BC, IA or TOSEI)
* Type of LBPayLinker wiring cable (BC, IA or TOSEI)
== BC Machine ==
This is the washer and dryer type of machine.[[File:Screenshot 20260417-171916 1.png|thumb|722x722px|BC Washer and Dryer|center]]


== Getting Started ==
== Getting Started ==


# Make sure the LBPayLinker model Type. See picture.
# Make sure the LBPayLinker model Type. See picture.
 
{| class="wikitable"
[[File:1000030570.png|thumb|[[File:1000030589.png|thumb|Model A1]]Model NYJ31]]
|+Device Model
 
![[File:1000030570.png|thumb]]NYJ31
 
![[File:1000030589.png|thumb|340x340px]]A1
 
|}
 
 
 
 
 
 
 
 
 
 
 
 




2. Check LBPayLinker parts.
* For model NYJ31 - antenna and machine wiring cable
* For model A1 - interface cable and machine wiring cable


{| class="wikitable"
|+
![[File:Wiring bc nyj31.png|thumb]]NYJ31
![[File:WIRING BC A1.png|thumb|355x355px]]A1
|}




3. Connect the interface cable on the device.
[[File:Connect bc standard.jpg|center|thumb|631x631px|* for device NYJ31 connect wifi antenna cable and machine wiring cable as picture above.]]
[[File:Connect bc a1 touch.jpg|center|thumb|646x646px|* for device A1 connect interface cable and machine wiring cable as picture above]]






4. Open BC machine cover.
{| class="wikitable"
|+
![[File:Open bc 10kg.jpg|thumb]]open board cover
![[File:Open bc top cover.png|thumb]]open top cover
![[File:Wiring bc dryer.jpg|thumb]]open coindrop cover
|}




5. Locate power connector and disconnect it to shutdown the machine.
[[File:Disconnect power bc.jpg|center|thumb]]


2. Check LBPayLinker parts.


* For model NYJ31 - antenna and machine wiring cable
6. Locate coindrop interface cable to machine board.
* For model A1 - interface cable and machine wiring cable


(1) Coindrop power to board
(2) Coindrop signal to board[[File:Bc coindrop-board cable resize.jpg|center|thumb|506x506px]]


3. Open BC machine cover.


* For BC washer, need to open top cover.
7. Locate LBPayLinker machine wiring cable.
* For BC dryer, need to open coindrop cover.
[[File:Bc cable wiring.jpg|center|thumb|381x381px]]




4. Locate power connector and disconnect it to shutdown the machine.
8. Connect machine wiring cable BC type to coindrop - board cable.


(1) Disconnect coindrop power to board cable and loop with LBPayLinker wiring cable.
[[File:Bc power coindrop.jpg|center|thumb]]


5. Locate coindrop interface cable to machine board.
(2) Disconnect coindrop signal to board cable and loop with LBPayLinker wiring cable. There are 2 signal pair, yellow-white and red-black. Use red-black signal pair.
[[File:Bc signal coindrop.jpg|center|thumb]]




6. Disconnect coindrop power to board cable and loop with LBPayLinker wiring cable.
9. Connect machine power source connector to the board.
[[File:Connect power source.jpg|center|thumb]]10. After the device done installation, next step is to configure the device. [[Configure device using admin app]]


== Installation video ==
Installation steps video. 


7. Disconnect coindrop signal to board cable and loop with LBPayLinker wiring cable. There are 2 signal pair, yellow-white and red-black. Use yellow-white signal pair.
https://lbunlimitedwash.com/lbwiki/video/BC_Device_installation.mp4

Latest revision as of 00:36, 27 April 2026

Pre-requisites

  • Open machine cover
  • Type of LBPayLinker devices (Model NYJ or A1)
  • Type of LBPayLinker wiring cable (BC, IA or TOSEI)

BC Machine

This is the washer and dryer type of machine.

BC Washer and Dryer


Getting Started

  1. Make sure the LBPayLinker model Type. See picture.
Device Model
NYJ31
A1


2. Check LBPayLinker parts.

  • For model NYJ31 - antenna and machine wiring cable
  • For model A1 - interface cable and machine wiring cable
NYJ31
A1


3. Connect the interface cable on the device.

* for device NYJ31 connect wifi antenna cable and machine wiring cable as picture above.
* for device A1 connect interface cable and machine wiring cable as picture above


4. Open BC machine cover.

open board cover
open top cover
open coindrop cover


5. Locate power connector and disconnect it to shutdown the machine.


6. Locate coindrop interface cable to machine board.

(1) Coindrop power to board

(2) Coindrop signal to board


7. Locate LBPayLinker machine wiring cable.


8. Connect machine wiring cable BC type to coindrop - board cable.

(1) Disconnect coindrop power to board cable and loop with LBPayLinker wiring cable.

(2) Disconnect coindrop signal to board cable and loop with LBPayLinker wiring cable. There are 2 signal pair, yellow-white and red-black. Use red-black signal pair.


9. Connect machine power source connector to the board.

10. After the device done installation, next step is to configure the device. Configure device using admin app

Installation video

Installation steps video. 

https://lbunlimitedwash.com/lbwiki/video/BC_Device_installation.mp4

Retrieved from "https://lbunlimitedwash.com/lbwiki/index.php?title=BC_machine_(washer_and_dryer)_install&oldid=139"