Jump to content

BC machine (washer and dryer) install: Difference between revisions

From LB Knowledge Base
← Older editNewer edit →
Admin (talk | contribs)
Bureaucrats, Interface administrators, Administrators
156 edits
VisualWikitext
No edit summary
Add bc content
Line 25: Line 25:
{| class="wikitable"
{| class="wikitable"
|+
|+
!s
![[File:Wiring bc nyj31.png|thumb]]NYJ31
!s
![[File:WIRING BC A1.png|thumb|355x355px]]A1
|}
|}


3. Connect the interface cable on the device.
[[File:Connect bc nyj31.jpg|center|617x617px]]


3. Open BC machine cover.
* for device NYJ31 connect wifi antenna cable and machine wiring cable as picture above.


* For BC washer, need to open top cover.
[[File:Connect bc a1.jpg|center|627x627px]]
* For BC dryer, need to open coindrop cover.


* for device A1 connect interface cable and machine wiring cable as picture above.


4. Locate power connector and disconnect it to shutdown the machine.
 
4. Open BC machine cover.
{| class="wikitable"
|+
![[File:Open bc 10kg.jpg|thumb]]open board cover
![[File:Open bc top cover.png|thumb]]open top cover
![[File:Wiring bc dryer.jpg|thumb]]open coindrop cover
|}
5. Locate power connector and disconnect it to shutdown the machine.




Revision as of 00:21, 18 April 2026

Pre-requisites

  • Open machine cover
  • Type of LBPayLinker devices (Model NYJ or A1)
  • Type of LBPayLinker wiring cable (BC, IA or TOSEI)

BC Machine

This is the washer and dryer type of machine.

BC Washer and Dryer


Getting Started

  1. Make sure the LBPayLinker model Type. See picture.
Device Model
NYJ31
A1


2. Check LBPayLinker parts.

  • For model NYJ31 - antenna and machine wiring cable
  • For model A1 - interface cable and machine wiring cable
NYJ31
A1

3. Connect the interface cable on the device.

File:Connect bc nyj31.jpg
  • for device NYJ31 connect wifi antenna cable and machine wiring cable as picture above.
File:Connect bc a1.jpg
  • for device A1 connect interface cable and machine wiring cable as picture above.


4. Open BC machine cover.

open board cover
open top cover
open coindrop cover

5. Locate power connector and disconnect it to shutdown the machine.


5. Locate coindrop interface cable to machine board.


6. Disconnect coindrop power to board cable and loop with LBPayLinker wiring cable.


7. Disconnect coindrop signal to board cable and loop with LBPayLinker wiring cable. There are 2 signal pair, yellow-white and red-black. Use yellow-white signal pair.

Retrieved from "https://lbunlimitedwash.com/lbwiki/index.php?title=BC_machine_(washer_and_dryer)_install&oldid=26"