Jump to content

BC machine (washer and dryer) install: Difference between revisions

From LB Knowledge Base
← Older editNewer edit →
Admin (talk | contribs)
Bureaucrats, Interface administrators, Administrators
156 edits
VisualWikitext
Add bc content
Add bc content
Line 49: Line 49:


6. Locate coindrop interface cable to machine board.
6. Locate coindrop interface cable to machine board.
[[File:Wiring bc bypass.png|center|thumb|571x571px|
[[File:Wiring bypass resize.jpg|center|thumb|758x758px|(1) Coindrop power to board


# Coindrop power to board
(2) Coindrop signal to board
# Coindrop signal to board


]]
]]
Line 65: Line 64:
|+
|+
![[File:Bc cable wiring.jpg|thumb]]wiring machine cable BC type
![[File:Bc cable wiring.jpg|thumb]]wiring machine cable BC type
![[File:Wiring bc coindrop loop.png|thumb]]connect the cable to coindrop in loop
![[File:Wiring bypass connect resize.jpg|thumb]]connect the cable to coindrop in loop
|}
|}




7.
7.

Revision as of 02:09, 18 April 2026

Pre-requisites

  • Open machine cover
  • Type of LBPayLinker devices (Model NYJ or A1)
  • Type of LBPayLinker wiring cable (BC, IA or TOSEI)

BC Machine

This is the washer and dryer type of machine.

BC Washer and Dryer


Getting Started

  1. Make sure the LBPayLinker model Type. See picture.
Device Model
NYJ31
A1


2. Check LBPayLinker parts.

  • For model NYJ31 - antenna and machine wiring cable
  • For model A1 - interface cable and machine wiring cable
NYJ31
A1


3. Connect the interface cable on the device.

* for device NYJ31 connect wifi antenna cable and machine wiring cable as picture above.
* for device A1 connect interface cable and machine wiring cable as picture above


4. Open BC machine cover.

open board cover
open top cover
open coindrop cover


5. Locate power connector and disconnect it to shutdown the machine.


6. Locate coindrop interface cable to machine board.

File:Wiring bypass resize.jpg
(1) Coindrop power to board (2) Coindrop signal to board


7. Connect machine wiring cable BC type to coindrop - board cable.

(1) Disconnect coindrop power to board cable and loop with LBPayLinker wiring cable.

(2) Disconnect coindrop signal to board cable and loop with LBPayLinker wiring cable. There are 2 signal pair, yellow-white and red-black. Use red-black signal pair.

wiring machine cable BC type
File:Wiring bypass connect resize.jpg
connect the cable to coindrop in loop


7.

Retrieved from "https://lbunlimitedwash.com/lbwiki/index.php?title=BC_machine_(washer_and_dryer)_install&oldid=42"