BC machine (washer and dryer) install

Pre-requisites

Open machine cover
Type of LBPayLinker devices (Model NYJ or A1)
Type of LBPayLinker wiring cable (BC, IA or TOSEI)

BC Machine

This is the washer and dryer type of machine.

Getting Started

Make sure the LBPayLinker model Type. See picture.

Device Model
NYJ31	A1

2. Check LBPayLinker parts.

For model NYJ31 - antenna and machine wiring cable
For model A1 - interface cable and machine wiring cable


NYJ31	A1

3. Connect the interface cable on the device.

File:Connect bc nyj31.jpg

for device NYJ31 connect wifi antenna cable and machine wiring cable as picture above.

File:Connect bc a1.jpg

for device A1 connect interface cable and machine wiring cable as picture above.

4. Open BC machine cover.


open board cover	open top cover	open coindrop cover

5. Locate power connector and disconnect it to shutdown the machine.

5. Locate coindrop interface cable to machine board.

6. Disconnect coindrop power to board cable and loop with LBPayLinker wiring cable.

7. Disconnect coindrop signal to board cable and loop with LBPayLinker wiring cable. There are 2 signal pair, yellow-white and red-black. Use yellow-white signal pair.