BC machine (washer and dryer) install

Pre-requisites

• Open machine cover
• Type of LBPayLinker devices (Model NYJ or A1)
• Type of LBPayLinker wiring cable (BC, IA or TOSEI)

Getting Started

1. Make sure the LBPayLinker model Type. See picture.

Model A1

Model NYJ31

2. Check LBPayLinker parts.

• For model NYJ31 - antenna and machine wiring cable
• For model A1 - interface cable and machine wiring cable

3. Open BC machine cover.

• For BC washer, need to open top cover.
• For BC dryer, need to open coindrop cover.

4. Locate power connector and disconnect it to shutdown the machine.

5. Locate coindrop interface cable to machine board.

6. Disconnect coindrop power to board cable and loop with LBPayLinker wiring cable.

7. Disconnect coindrop signal to board cable and loop with LBPayLinker wiring cable. There are 2 signal pair, yellow-white and red-black. Use yellow-white signal pair.